L103W Fluorine-free sanding agent
Classification:
添加量： 2%-4%
Summary Brief:
Key words: L103W Fluorine-free sanding agentTexturizersandstonebarium
Product introduction:
Products：
This product is an organic polymer sanding agent,does not contain fluorine components,testing does not contain PFAS fluorine elements,in line with international standards.It is used to replace the traditional fluorine and PTFE sanding agent.The main principle of this product is to use the different curing rate of resin to cause the flow blocking of the coating film to achieve the sanding effect.
Product Characteristics：
103X contains a certain amount of curing agent,so in the powder coating it is necessary to remove the corresponding curing agent to maintain the balance of the curing ratio,according to the proportion of one part of L103X to provide 0.3 parts of the curing agent to adjust the formula of the powder coating.Use the additive amount of 1%-5%,the only requirement for the use of precipitated barium sulfate,there is no requirement for the resin portion,it can be 55%-60%.
If you think the three-dimensional sense is strong and want to reduce the three-dimensional sense,you can use natural barium and precipitated barium together,the more natural barium the weaker the sense of three-dimensionality,and at the same time the natural barium plus more luster will also rise.
If you want to adjust the luster of the sand pattern inside the TGIC system,you can choose to add a small amount of 1%-2%HAA to reduce the luster.
In the white system of titanium dioxide add more than 20%,too much will lead to the board surface sand texture becomes weak,in the white system add 1%-3%of epoxy-based acrylic resin to reduce the gloss.
Product Use Formulation：
1.55% resin in TGIC system
NH3307 | 330 | 330 | 330 | 330 |
|---|---|---|---|---|
TGIC | 25 | 21.4 | 20 | 18 |
L103X | 6 | 12 | 18 | 24 |
soot | 3 | 3 | 3 | 3 |
barium precipitate | 233 | 227 | 223 | 215 |
total：600g | ||||
| ||||
glossy | 35/45 | 11/11 | 5/6 | 4/4 |
face | sandstone | sandstone | sandstone | sandstone |
mechanics | +-50 | +-50 | +-50 | +-50 |
2.在TGIC体系60%树脂份
NH3307 | 360 | 360 | 360 | 360 |
|---|---|---|---|---|
TGIC | 25.2 | 23.4 | 22 | 20 |
L103X | 6 | 12 | 18 | 24 |
soot | 3 | 3 | 3 | 3 |
barium precipitate | 204 | 200 | 196 | 192 |
subtotal：600g | ||||
| ||||
glossy | 49/50 | 30/31 | 20/18 | 8/9 |
face | wrinkles | sandstone | sandstone | sandstone |
mechanics | +-50 | +-50 | +-50 | +-50 |
3.55% resin in HAA system
NH3307 | 330 | 330 | 330 | 330 |
|---|---|---|---|---|
HAA | 13.7 | 11.9 | 10 | 8.5 |
L103X | 12 | 18 | 24 | 30 |
soot | 3 | 3 | 3 | 3 |
barium precipitate | 235 | 229 | 223 | 216 |
total：600g | ||||
| ||||
glossy | 14/18 | 6/6 | 5/5 | 4.5/5 |
face | sandstone | sandstone | sandstone | sandstone |
mechanics | +-50 | +-50 | +-50 | +-50 |
4.60% resin in HAA system
NH3307 | 360 | 360 | 360 | 360 |
|---|---|---|---|---|
HAA | 15.3 | 13.5 | 11.7 | 10 |
L103X | 12 | 18 | 24 | 30 |
soot | 3 | 3 | 3 | 3 |
barium precipitate | 235 | 229 | 223 | 216 |
total：600g | ||||
| ||||
glossy | 25/27 | 15/16 | 10/10 | 8/7 |
face | sandstone | sandstone | sandstone | wrinkles |
mechanics | +-50 | +-50 | +-50 | +-50 |
5.L103X Repeat Extrusion Experimental Verification
NH3307 | 330 | 330 | 330 | 330 |
|---|---|---|---|---|
TGIC | 20 | 20 | A100:12 | 12 |
L103X | 18 | 18 | 18 | 18 |
soot | 3 | 3 | 3 | 3 |
barium precipitate | 223 | 223 | 231 | 231 |
First extrusion | ||||
glossy | 5/5 | 5/6 | ||
face | sand grain (geology) | sand grain (geology) | ||
(old) cunning | +-50 | +-50 | ||
Second extrusion | ||||
glossy | 3/3 | 4/5 | ||
face | sandstone | sandstone | ||
mechanics | +-50 | +-50 | ||
Third extrusion | ||||
glossy | 4/4 | 4/5 | ||
face | sandstone | sandstone | ||
(old) cunning | +-50 | +-50 | ||
6.L103X Boiling Resistance Test
| L103X(TGIC) | L103X(HAA) | L103X(TGIC)白色 | L103X(HAA)白色 |
|---|---|---|---|---|
glossy | 6% | 5% | 15% | 14% |
face | sandstone | sandstone | sandstone | sandstone |
mechanics | ±50 | ±50 | ±50 | ±50 |
Boiled for 2 hours test | ||||
glossy | 6% | 5% | 15% | 14% |
face | sandstone | sandstone | sandstone | sandstone |
mechanics | ±50 | ±50 | ±50 | ±50 |
RELATED
Related Products
产品名称
应用及特点
附件
Outdoor acrylic matting resin with 2-7% gloss. In combination with B110, the gloss can be adjusted by 7-30%.
Increases coating surface hardness and scratch resistance Does not smoke, does not produce foggy shadows, does not affect gloss
It is suitable for indoor and outdoor systems with good leveling effect and strong ability to overcome pitting and shrinkage.
Improved and enhanced product for L88, higher fresh reflectivity, longer tilting fluidity, good fullness.
Specialized matting curing agent for pure polyester/HAA systems with good storage stability. Innovative products
Let the aluminum silver powder float to the surface in a regular arrangement, increase the brightness of silver powder, reduce the amount of silver powder
Increase the surface hardness and abrasion resistance of silver powder, increase the surface hardness and abrasion resistance of high-gloss powder
Better combination of organic resins and inorganic pigmented fillers Increases adhesion, flexing and impact resistance.
Overcome the yellowing caused by high temperature and improve the weathering performance of the coating.
Anti-yellowing agent for gas stoves to improve the weathering properties of coatings
High melting point organic matter, prevent high temperature powder agglomeration Improvement of powder looseness and flow agent, which is favorable for powder discharge.
Suitable for pure epoxy, pure polyester/TGIC, pure polyester/HAA with good three-dimensionality. Reactor production, pure product, no filler.
L206 Low temperature curing agent
Low temperature curing agent, react with epoxy resin 130℃×30min curing
Promotes hybrid, pure polyester/TGIC curing No yellowing, does not affect leveling, lowers baking temperature
A three-in-one leveling agent, the effect is better than adding separately, easy to weigh, not easy to make mistakes.
Adjust the surface tension of the coating film more flat, smooth and bright. Special formula design to eliminate pitting and shrinkage of holes
MESSAGE
Product Advisory Message
Company: No.1 Zhongshan Avenue, Qiaokou District, Wuhan
Factory: Xiacha Chemical Industry Park, Xiantao City, Hubei Province
Whatsup No:15907193659/15926311183
E-mail: ooha@163.com
Sales Management:0086-15907193659 Huang Zijuan
Technical advice:0086-13377856148 Liu Yincai
WeChat Public Number