L701A Brightener
Classification:
添加量: 0.5-1%
Summary Brief:
Key words: L701A Brightenerleveling agentsurfaceshrinkage
Product introduction:
L701 Brightener
Used for all kinds of powders to regulate surface tension, eliminate shrinkage and improve leveling.
L701 is a copolymer of acrylic ester,which is modified by adding low surface tension substances during the synthesis,so that it has lower surface tension and can be used in all kinds of powder coatings,and eliminates pitting and shrinkage when cooperating with leveling agent.
L701 is divided into two kinds,one without functional groups,i.e.,ordinary brightener,and the other is synthesized by adding a small amount of hydroxyl or carboxyl and other active groups,which can react with epoxy or polyester,and the molecules of the brightener will be combined with the resin through the reaction and be suspended in the coating,which will regulate the surface tension of the whole coating,and the effect will be better.
1.Technical Parameters
Appearance:white powder or crystal particles
Softening point:115-125°C
Volatile matter:≤1%
2.Product Characteristics
It can be used in all kinds of powder coatings to improve leveling and eliminate shrinkage and pitting in combination with leveling agents
3.Usage and Characteristics
(1)Mixed with other raw materials,add about 1%,not more than 2%is recommended.
(1)The product has been modified by adding low surface tension substances,with better ability to eliminate pockmarks and shrinkage.
(3)Polar groups make the powder better charged.
(4)The brightening agent containing active groups can be suspended in the whole coating,which makes the effect more uniform.
4.Packaging, storage
Kraft paper bag (polyethylene lining), 25Kg/bag, stored in a cool and dry place, away from fire and heat sources.
RELATED
Related Products
产品名称
应用及特点
附件
Outdoor acrylic matting resin with 2-7% gloss. In combination with B110, the gloss can be adjusted by 7-30%.
Increases coating surface hardness and scratch resistance Does not smoke, does not produce foggy shadows, does not affect gloss
It is suitable for indoor and outdoor systems with good leveling effect and strong ability to overcome pitting and shrinkage.
Improved and enhanced product for L88, higher fresh reflectivity, longer tilting fluidity, good fullness.
Specialized matting curing agent for pure polyester/HAA systems with good storage stability. Innovative products
Let the aluminum silver powder float to the surface in a regular arrangement, increase the brightness of silver powder, reduce the amount of silver powder
Increase the surface hardness and abrasion resistance of silver powder, increase the surface hardness and abrasion resistance of high-gloss powder
Better combination of organic resins and inorganic pigmented fillers Increases adhesion, flexing and impact resistance.
Overcome the yellowing caused by high temperature and improve the weathering performance of the coating.
Anti-yellowing agent for gas stoves to improve the weathering properties of coatings
High melting point organic matter, prevent high temperature powder agglomeration Improvement of powder looseness and flow agent, which is favorable for powder discharge.
Suitable for pure epoxy, pure polyester/TGIC, pure polyester/HAA with good three-dimensionality. Reactor production, pure product, no filler.
L206 Low temperature curing agent
Low temperature curing agent, react with epoxy resin 130℃×30min curing
Promotes hybrid, pure polyester/TGIC curing No yellowing, does not affect leveling, lowers baking temperature
A three-in-one leveling agent, the effect is better than adding separately, easy to weigh, not easy to make mistakes.
Adjust the surface tension of the coating film more flat, smooth and bright. Special formula design to eliminate pitting and shrinkage of holes
MESSAGE
Product Advisory Message





