L206 Low temperature curing agent
Classification:
添加量： 100:6
Summary Brief:
Key words: L206 Low temperature curing agentCuring agentcuringagent
Product introduction:
L206 low temperature curing agent
Epoxy curing agent 130 degrees 30 minutes curing
The chemical structure of L206 is 2-phenylimidazoline, which is the reaction product of the first step in the production of L68 matting agent, and it can be used as a low-temperature curing agent for epoxy resins or as an accelerator applied to powder coatings.
1.Technical indicators
|
enterprise |
norm |
|---|---|
|
appearances |
White to light yellow powder |
|
Melting range [℃] |
95-102 |
|
Nitrogen content [%] |
18.9-19.4 |
2.Technical characteristics
■As the main curing agent, it enables epoxy resin powder coatings to achieve low temperature curing at 130℃/30 minutes or high temperature fast curing at 240℃/30 seconds.
■It can be used as an accelerator in pure epoxy, hybrid, and pure polyester systems to lower the curing temperature or shorten the curing time.
3.Usage
As curing agent L206,the dosage is 7%of the epoxy resin.
As an accelerator,the dosage is 0.1-0.5%.
Reference formula
|
brand name |
dosage |
|---|---|
|
epoxy resin (chemistry) |
60 |
|
L206 low temperature curing agent |
4.2 |
|
barium sulfate |
35 |
|
soot |
0.7 |
|
L88 Leveling Agent |
1 |
|
L701 Brightener |
1 |
|
L307 Anti-yellowing benzoin |
0.6 |
|
Extruded at 90-100℃, cured at 130℃×30 minutes, good leveling and mechanical properties. |
|
4.Packaging and Storage
Use polyethylene lined paper bag, net weight 25Kg per bag, store in cool and dry place to avoid moisture absorption, close immediately after use. Avoid contact with other chemicals. Keep away from fire source.
5．Other products in the same category
L216 accelerator:It can promote the curing of mixed and pure polyester powder without yellowing or affecting the leveling,and it is a better accelerator at present.Add 0.1-0.5%.
2-methylimidazole:traditional and classic accelerator,add more yellowing and affect the leveling.
RELATED
Related Products
产品名称
应用及特点
附件
Outdoor acrylic matting resin with 2-7% gloss. In combination with B110, the gloss can be adjusted by 7-30%.
Increases coating surface hardness and scratch resistance Does not smoke, does not produce foggy shadows, does not affect gloss
It is suitable for indoor and outdoor systems with good leveling effect and strong ability to overcome pitting and shrinkage.
Improved and enhanced product for L88, higher fresh reflectivity, longer tilting fluidity, good fullness.
Specialized matting curing agent for pure polyester/HAA systems with good storage stability. Innovative products
Let the aluminum silver powder float to the surface in a regular arrangement, increase the brightness of silver powder, reduce the amount of silver powder
Increase the surface hardness and abrasion resistance of silver powder, increase the surface hardness and abrasion resistance of high-gloss powder
Better combination of organic resins and inorganic pigmented fillers Increases adhesion, flexing and impact resistance.
Overcome the yellowing caused by high temperature and improve the weathering performance of the coating.
Anti-yellowing agent for gas stoves to improve the weathering properties of coatings
High melting point organic matter, prevent high temperature powder agglomeration Improvement of powder looseness and flow agent, which is favorable for powder discharge.
Suitable for pure epoxy, pure polyester/TGIC, pure polyester/HAA with good three-dimensionality. Reactor production, pure product, no filler.
L206 Low temperature curing agent
Low temperature curing agent, react with epoxy resin 130℃×30min curing
Promotes hybrid, pure polyester/TGIC curing No yellowing, does not affect leveling, lowers baking temperature
A three-in-one leveling agent, the effect is better than adding separately, easy to weigh, not easy to make mistakes.
Adjust the surface tension of the coating film more flat, smooth and bright. Special formula design to eliminate pitting and shrinkage of holes
MESSAGE
Product Advisory Message
Company: No.1 Zhongshan Avenue, Qiaokou District, Wuhan
Factory: Xiacha Chemical Industry Park, Xiantao City, Hubei Province
Whatsup No:15907193659/15926311183
E-mail: ooha@163.com
Sales Management:0086-15907193659 Huang Zijuan
Technical advice:0086-13377856148 Liu Yincai
WeChat Public Number