L506 Toughening agent
Classification:
添加量： 0.5-1%
Summary Brief:
Key words: L506 Toughening agentSpecialty additivespowderbending
Product introduction:
L506 Toughening agent
Increase film toughness and flex resistance
L506 is a thermoplastic resin with high viscosity after heating and melting, which can make the powder coating firmly bonded to the workpiece and increase the adhesion, flexibility and bending resistance.
1.Technical Parameters
Appearance:white powder
Volatilization:≤0.5%
2.Usage
Suitable for all kinds of powder coatings.
Dosage 0.5-2%,mixed with other raw materials and extruded.
3.Product Characteristics
(1).Enhance the flexibility of the powder,which can effectively improve the bending resistance of the coated object,reduce the coating film easy to break,and significantly enhance the impact resistance of the coating film.
(2).Slow down or adjust the curing speed and curing temperature of the resin in the powder to increase the edge coverage.
(3).It can also adjust the three-dimensional sense of pattern in art powder.
4．Packaging, storage
Kraft paper bag (polyethylene lining), 15Kg/bag, stored in cool and dry place.
5．Other products in the same category
L708 coupling agent: It can link resin and pigment filler organically, increase adhesion and surface smoothness.
RELATED
Related Products
产品名称
应用及特点
附件
Outdoor acrylic matting resin with 2-7% gloss. In combination with B110, the gloss can be adjusted by 7-30%.
Increases coating surface hardness and scratch resistance Does not smoke, does not produce foggy shadows, does not affect gloss
It is suitable for indoor and outdoor systems with good leveling effect and strong ability to overcome pitting and shrinkage.
Improved and enhanced product for L88, higher fresh reflectivity, longer tilting fluidity, good fullness.
Specialized matting curing agent for pure polyester/HAA systems with good storage stability. Innovative products
Let the aluminum silver powder float to the surface in a regular arrangement, increase the brightness of silver powder, reduce the amount of silver powder
Increase the surface hardness and abrasion resistance of silver powder, increase the surface hardness and abrasion resistance of high-gloss powder
Better combination of organic resins and inorganic pigmented fillers Increases adhesion, flexing and impact resistance.
Overcome the yellowing caused by high temperature and improve the weathering performance of the coating.
Anti-yellowing agent for gas stoves to improve the weathering properties of coatings
High melting point organic matter, prevent high temperature powder agglomeration Improvement of powder looseness and flow agent, which is favorable for powder discharge.
Suitable for pure epoxy, pure polyester/TGIC, pure polyester/HAA with good three-dimensionality. Reactor production, pure product, no filler.
L206 Low temperature curing agent
Low temperature curing agent, react with epoxy resin 130℃×30min curing
Promotes hybrid, pure polyester/TGIC curing No yellowing, does not affect leveling, lowers baking temperature
A three-in-one leveling agent, the effect is better than adding separately, easy to weigh, not easy to make mistakes.
Adjust the surface tension of the coating film more flat, smooth and bright. Special formula design to eliminate pitting and shrinkage of holes
MESSAGE
Product Advisory Message
Company: No.1 Zhongshan Avenue, Qiaokou District, Wuhan
Factory: Xiacha Chemical Industry Park, Xiantao City, Hubei Province
Whatsup No:15907193659/15926311183
E-mail: ooha@163.com
Sales Management:0086-15907193659 Huang Zijuan
Technical advice:0086-13377856148 Liu Yincai
WeChat Public Number