L102 wrinkle agent
Classification:
添加量： 0.1%-0.5%
Summary Brief:
Key words: L102 wrinkle agentTexturizerwrinklemixing
Product introduction:
L102 wrinkle agent
Additives for the production of wrinkles and patterns in internal extrusion
The advantages of using L102 to produce wrinkle powder are simple process, one-time formation of grain, stable texture, and good use of recycled powder when spraying.
1.Technical Parameters
Appearance: white powder
Specific gravity: 1.0-1.1
Volatilization: ≤0.5%
2.Product Characteristics
(1)It can be used in epoxy,hybrid,pure polyester and other powder coatings to produce wrinkle and pattern effects.
(2)Internal extrusion production wrinkles,simple process,once into the pattern,recycling powder good use.
(3)Wrinkle size can be adjusted,supplemented by other additives wrinkle three-dimensional sense can be made stronger.
(4)Stable quality,assured use.
3.Usage
Add when mixing, participate in extrusion, dosage 0.1-0.4%, L102 add more wrinkles is small, add less wrinkles is big, formula filler more wrinkles is small, filler less wrinkles is big.
Reference formula
|
brand name |
dosage |
clarification |
|---|---|---|
|
epoxy |
27 |
|
|
polyesters |
27 |
|
|
titanium dioxide |
12 |
|
|
barium sulfate |
20 |
|
|
calcium sulfide Ca(OH)2 |
15 |
Calcium's low mobility is good for tattoo formation |
|
L102 wrinkle agent |
0.3 |
Main Texturing Auxiliaries |
|
butyraldehyde |
0.8 |
Helpful in eliminating bottoming out and shrinkage |
|
Organic Bentonite |
0.2 |
Stops the flow to help form lines |
|
2-Methylimidazole |
0.03 |
Promoter, three-dimensional strong and stronger |
|
color |
适量 |
|
Process: adequate mixing of good extrusion to do this kind of powder is unfavorable, on the contrary, the wrinkle effect will be better, so mixing of other materials added to the uniformity and then add L102 slow mixing a little bit can be mixed, mixer next to the crushing motor can be not open, extrusion temperature should be lower.
4．Other products in the same category
L101 floating agent:external mixing production of wrinkle powder,coarse,fine,flaky three specifications.
L104 special effect floating agent:three-dimensional sense of strong,with the addition of the leveling agent of the primer can also be out of the pattern,suitable for castings,thick workpieces and no light wrinkles.Pay attention to prevent contamination of other powders when using.
RELATED
Related Products
产品名称
应用及特点
附件
Outdoor acrylic matting resin with 2-7% gloss. In combination with B110, the gloss can be adjusted by 7-30%.
Increases coating surface hardness and scratch resistance Does not smoke, does not produce foggy shadows, does not affect gloss
It is suitable for indoor and outdoor systems with good leveling effect and strong ability to overcome pitting and shrinkage.
Improved and enhanced product for L88, higher fresh reflectivity, longer tilting fluidity, good fullness.
Specialized matting curing agent for pure polyester/HAA systems with good storage stability. Innovative products
Let the aluminum silver powder float to the surface in a regular arrangement, increase the brightness of silver powder, reduce the amount of silver powder
Increase the surface hardness and abrasion resistance of silver powder, increase the surface hardness and abrasion resistance of high-gloss powder
Better combination of organic resins and inorganic pigmented fillers Increases adhesion, flexing and impact resistance.
Overcome the yellowing caused by high temperature and improve the weathering performance of the coating.
Anti-yellowing agent for gas stoves to improve the weathering properties of coatings
High melting point organic matter, prevent high temperature powder agglomeration Improvement of powder looseness and flow agent, which is favorable for powder discharge.
Suitable for pure epoxy, pure polyester/TGIC, pure polyester/HAA with good three-dimensionality. Reactor production, pure product, no filler.
L206 Low temperature curing agent
Low temperature curing agent, react with epoxy resin 130℃×30min curing
Promotes hybrid, pure polyester/TGIC curing No yellowing, does not affect leveling, lowers baking temperature
A three-in-one leveling agent, the effect is better than adding separately, easy to weigh, not easy to make mistakes.
Adjust the surface tension of the coating film more flat, smooth and bright. Special formula design to eliminate pitting and shrinkage of holes
MESSAGE
Product Advisory Message
Company: No.1 Zhongshan Avenue, Qiaokou District, Wuhan
Factory: Xiacha Chemical Industry Park, Xiantao City, Hubei Province
Whatsup No:15907193659/15926311183
E-mail: ooha@163.com
Sales Management:0086-15907193659 Huang Zijuan
Technical advice:0086-13377856148 Liu Yincai
WeChat Public Number