L2018C Outdoor matting agent
Classification:
添加量： Dosing 1%-6% Gloss 6%-50%
Summary Brief:
Key words: L2018C Outdoor matting agentExtinction agentpolyestermatting
Product introduction:
Product Features：
L2018C is a classic matting agent for outdoor use,with good surface leveling,up to 4 degrees of no light,good extrusion stability,good storage stability and wide polyester selectivity.
L2018C also has good matting effect on low-cost polyester and can be used indoors in outdoor system.
Technical indicators：
Appearance:light yellow to white powder
Heap density:380-500 g/l
Solid content:≥98.5%
Tests with different additions：
|
serial number |
1 |
2 |
3 |
4 |
5 |
6 |
|---|---|---|---|---|---|---|
|
Outdoor Polyester |
55 |
55 |
55 |
55 |
55 |
55 |
|
TGIC |
4.1 |
4.25 |
4.4 |
4.5 |
4.6 |
4.75 |
|
leveling agent |
1 |
1 |
1 |
1 |
1 |
1 |
|
optical enhancer |
1 |
1 |
1 |
1 |
1 |
1 |
|
Styrax officinalis or Styrax benzoin |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
|
soot |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
|
matting barium |
36.9 |
35.75 |
34.6 |
33.5 |
32.4 |
31.25 |
|
L2018C |
1 |
2 |
3 |
4 |
5 |
6 |
|
figure |
100 |
100 |
100 |
100 |
100 |
100 |
|
|
|
|
|
|
|
|
|
glossy |
67 |
33 |
17 |
11 |
7.5 |
6.7 |
|
Gelation time |
160s |
110s |
85s |
75s |
60s |
60s |
|
face |
leveling+ |
leveling++ |
leveling+++ |
leveling+++ |
leveling+++ |
leveling+++ |
L2018C extinction curves with different additive quantity
Different Polyester Tests：
|
polyesters |
Polyester 1 |
Polyester 2 |
Polyester 3 |
Polyester 4 |
Polyester 5 |
|---|---|---|---|---|---|
|
polyesters |
55 |
55 |
55 |
55 |
55 |
|
TGIC |
4.75 |
4.75 |
4.75 |
4.75 |
4.75 |
|
leveling agent |
1 |
1 |
1 |
1 |
1 |
|
optical enhancer |
1 |
1 |
1 |
1 |
1 |
|
Styrax officinalis or Styrax benzoin |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
|
L2018C |
6 |
6 |
6 |
6 |
6 |
|
soot |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
|
Ultrafine barium |
31.25 |
31.25 |
31.25 |
31.25 |
31.25 |
|
|
|
|
|
|
|
|
extrusion temperature |
90-110℃ |
||||
|
Baking temperature |
210℃/15min |
||||
|
Gloss % |
6.9 |
6.3 |
5.8 |
6.0 |
6.5 |
|
face |
leveling |
leveling |
leveling |
leveling |
leveling |
|
mechanics |
+-50 |
+-50 |
+-50 |
+-50 |
+-50 |
Lab tested polyesters include: Excalibur 4ET, Maplewood 2006, Guanghua 2205, Optimus 3307, Tenson 2701, Sino-French 9310, Sino-French 9309, and so on.
caveat：
1.L2018C is not sensitive to extrusion temperature,extrusion temperature in the range of 100℃-130℃can be.
2.The matting agent and material mixing should be uniform,mixing to open the crushing,try to break the polyester a little smaller,so that the matting powder made,the stability of each batch will be good.
3.When grinding,pay attention to the control of powder particle size,the finer the particle size,the better the leveling.
4.It is recommended to do a good test before the large production.
RELATED
Related Products
产品名称
应用及特点
附件
Outdoor acrylic matting resin with 2-7% gloss. In combination with B110, the gloss can be adjusted by 7-30%.
Increases coating surface hardness and scratch resistance Does not smoke, does not produce foggy shadows, does not affect gloss
It is suitable for indoor and outdoor systems with good leveling effect and strong ability to overcome pitting and shrinkage.
Improved and enhanced product for L88, higher fresh reflectivity, longer tilting fluidity, good fullness.
Specialized matting curing agent for pure polyester/HAA systems with good storage stability. Innovative products
Let the aluminum silver powder float to the surface in a regular arrangement, increase the brightness of silver powder, reduce the amount of silver powder
Increase the surface hardness and abrasion resistance of silver powder, increase the surface hardness and abrasion resistance of high-gloss powder
Better combination of organic resins and inorganic pigmented fillers Increases adhesion, flexing and impact resistance.
Overcome the yellowing caused by high temperature and improve the weathering performance of the coating.
Anti-yellowing agent for gas stoves to improve the weathering properties of coatings
High melting point organic matter, prevent high temperature powder agglomeration Improvement of powder looseness and flow agent, which is favorable for powder discharge.
Suitable for pure epoxy, pure polyester/TGIC, pure polyester/HAA with good three-dimensionality. Reactor production, pure product, no filler.
L206 Low temperature curing agent
Low temperature curing agent, react with epoxy resin 130℃×30min curing
Promotes hybrid, pure polyester/TGIC curing No yellowing, does not affect leveling, lowers baking temperature
A three-in-one leveling agent, the effect is better than adding separately, easy to weigh, not easy to make mistakes.
Adjust the surface tension of the coating film more flat, smooth and bright. Special formula design to eliminate pitting and shrinkage of holes
MESSAGE
Product Advisory Message
Company: No.1 Zhongshan Avenue, Qiaokou District, Wuhan
Factory: Xiacha Chemical Industry Park, Xiantao City, Hubei Province
Whatsup No:15907193659/15926311183
E-mail: ooha@163.com
Sales Management:0086-15907193659 Huang Zijuan
Technical advice:0086-13377856148 Liu Yincai
WeChat Public Number