L307B Antifoam agent
Classification:
添加量： 0.5-1%
Summary Brief:
Key words: L307B Antifoam agentleveling agentcaneliminate
Product introduction:
307B Defoamer
307B can be attached to the surface of air bubbles during the melting process of powder and let the air bubbles float out of the coating to achieve the effect of defoaming, and can eliminate the air holes and pinholes in the coating film caused by the water contained in the substrate with insufficient density, such as cast iron and aluminum parts.
1.Technical Parameters
Appearance:white micro-powder
Melting point:135℃~150
Volatile matter:≤0.2%
2.Usage
Thermosetting and thermoplastic powders suitable for all types of systems.
Dosage 0.5-1%, mixed with other raw materials for extrusion.
3.Product Characteristics
(1)Improve coating degassing during powder melting.It can reduce the dosage of benzoin accordingly.
(2)In the spraying construction,it can eliminate the air holes and pinholes in the coating film caused by the moisture contained in the substrate with insufficient density,such as cast iron and cast aluminum parts.
(3)Improve the surface hardness and smoothness,so it can make the coating film surface more wear-resistant and anti-dirt.
(4)Good compatibility with other materials.
4．Packaging, storage
Kraft paper bag (polyethylene lining), 20Kg/bag, stored in a cool and dry place, away from fire and heat sources.
5．Other products in the same category
L306 common benzoin:eliminates pinholes,strengthens much easier yellowing
L307 anti-yellowing benzoin:eliminate pinholes,not yellowing.
L307A degassing agent:eliminate pinholes,some occasions can replace the benzoin.
RELATED
Related Products
产品名称
应用及特点
附件
Outdoor acrylic matting resin with 2-7% gloss. In combination with B110, the gloss can be adjusted by 7-30%.
Increases coating surface hardness and scratch resistance Does not smoke, does not produce foggy shadows, does not affect gloss
It is suitable for indoor and outdoor systems with good leveling effect and strong ability to overcome pitting and shrinkage.
Improved and enhanced product for L88, higher fresh reflectivity, longer tilting fluidity, good fullness.
Specialized matting curing agent for pure polyester/HAA systems with good storage stability. Innovative products
Let the aluminum silver powder float to the surface in a regular arrangement, increase the brightness of silver powder, reduce the amount of silver powder
Increase the surface hardness and abrasion resistance of silver powder, increase the surface hardness and abrasion resistance of high-gloss powder
Better combination of organic resins and inorganic pigmented fillers Increases adhesion, flexing and impact resistance.
Overcome the yellowing caused by high temperature and improve the weathering performance of the coating.
Anti-yellowing agent for gas stoves to improve the weathering properties of coatings
High melting point organic matter, prevent high temperature powder agglomeration Improvement of powder looseness and flow agent, which is favorable for powder discharge.
Suitable for pure epoxy, pure polyester/TGIC, pure polyester/HAA with good three-dimensionality. Reactor production, pure product, no filler.
L206 Low temperature curing agent
Low temperature curing agent, react with epoxy resin 130℃×30min curing
Promotes hybrid, pure polyester/TGIC curing No yellowing, does not affect leveling, lowers baking temperature
A three-in-one leveling agent, the effect is better than adding separately, easy to weigh, not easy to make mistakes.
Adjust the surface tension of the coating film more flat, smooth and bright. Special formula design to eliminate pitting and shrinkage of holes
MESSAGE
Product Advisory Message
Company: No.1 Zhongshan Avenue, Qiaokou District, Wuhan
Factory: Xiacha Chemical Industry Park, Xiantao City, Hubei Province
Whatsup No:15907193659/15926311183
E-mail: ooha@163.com
Sales Management:0086-15907193659 Huang Zijuan
Technical advice:0086-13377856148 Liu Yincai
WeChat Public Number