L107 indoor sheeting agent
Classification:
添加量： 2%-4%
Summary Brief:
Key words: L107 indoor sheeting agentTexturizergrainpowder
Product introduction:
Product Features：
L107 sheen agent,also known as water grain agent is a metal-organic complex with strong curing promotion effect,mainly used for the production of sheen powder,can also be used for the matting of powder coatings,but also the preparation of sand,wrinkle,tortoise and other types of fine art-type powder coatings.
Application Test Formulation：
|
brand name |
Recipe 1 |
Recipe 2 |
clarification |
|---|---|---|---|
|
epoxy resin (chemistry) |
60 |
65 |
|
|
polyester resin |
0 |
5 |
Add a small amount of polyester to make the grain bigger, use 6/4 polyester. |
|
L107 Sheep agent |
3 |
2.5 |
Dosage can be reduced to 2.5 servings |
|
dicyandiamide |
3 |
3 |
Dosage 4-5% of epoxy |
|
color filling |
34 |
24.5 |
Fewer fillers result in larger grain, more fillers result in smaller grain. |
|
L88 Leveling Agent |
0.2 |
0.2 |
Add a small amount of leveling agent to eliminate pockmarks and highlights |
caveat：
1.Epoxy resin has a greater impact on the sheer grain,Jinfeng Shanfu epoxy made of grain large,Yuehua South Asia epoxy made of grain small.
2.90-100 degrees extrusion,secondary mill can be adjusted to small,over 140 mesh sieve.Because L107 has a strong curing effect,extrusion temperature should be lower.
3.Formula 2 as a primer,mixed with L120 into a snowflake pattern,mixed with L118 into a tortoise effect.
4.When spraying powder,large lines should be sprayed thick,otherwise it will be shiny,small lines can be sprayed thin.200℃×15 minutes curing.
5.L107 has irritation to eyes and respiratory tract,if accidentally splashed into the eyes,should be immediately rinsed with large amounts of water for 15 minutes and then seek medical attention,out of contact,the above symptoms will disappear within a week.
RELATED
Related Products
产品名称
应用及特点
附件
Outdoor acrylic matting resin with 2-7% gloss. In combination with B110, the gloss can be adjusted by 7-30%.
Increases coating surface hardness and scratch resistance Does not smoke, does not produce foggy shadows, does not affect gloss
It is suitable for indoor and outdoor systems with good leveling effect and strong ability to overcome pitting and shrinkage.
Improved and enhanced product for L88, higher fresh reflectivity, longer tilting fluidity, good fullness.
Specialized matting curing agent for pure polyester/HAA systems with good storage stability. Innovative products
Let the aluminum silver powder float to the surface in a regular arrangement, increase the brightness of silver powder, reduce the amount of silver powder
Increase the surface hardness and abrasion resistance of silver powder, increase the surface hardness and abrasion resistance of high-gloss powder
Better combination of organic resins and inorganic pigmented fillers Increases adhesion, flexing and impact resistance.
Overcome the yellowing caused by high temperature and improve the weathering performance of the coating.
Anti-yellowing agent for gas stoves to improve the weathering properties of coatings
High melting point organic matter, prevent high temperature powder agglomeration Improvement of powder looseness and flow agent, which is favorable for powder discharge.
Suitable for pure epoxy, pure polyester/TGIC, pure polyester/HAA with good three-dimensionality. Reactor production, pure product, no filler.
L206 Low temperature curing agent
Low temperature curing agent, react with epoxy resin 130℃×30min curing
Promotes hybrid, pure polyester/TGIC curing No yellowing, does not affect leveling, lowers baking temperature
A three-in-one leveling agent, the effect is better than adding separately, easy to weigh, not easy to make mistakes.
Adjust the surface tension of the coating film more flat, smooth and bright. Special formula design to eliminate pitting and shrinkage of holes
MESSAGE
Product Advisory Message
Company: No.1 Zhongshan Avenue, Qiaokou District, Wuhan
Factory: Xiacha Chemical Industry Park, Xiantao City, Hubei Province
Whatsup No:15907193659/15926311183
E-mail: ooha@163.com
Sales Management:0086-15907193659 Huang Zijuan
Technical advice:0086-13377856148 Liu Yincai
WeChat Public Number